HUBBLE LITHIUM INVERTER INTEGRATION
The Hubble range of Lithium batteries integrates with a wide range of inverters through CAN bus, alternatively the Hubble range of lithium batteries can be used without communications if your inverter supports settings by voltage.
Please refer to our Inverter & Hubble Cloudlink Setup Guides for compatibility.
Please refer to our Inverter & Hubble Cloudlink Setup Guides for compatibility.
OUR RANGE
We have a wide range of Lithium batteries available and supply lithium products ranging from 12V to 51V. These configurations come in rackmount, Wallmount and Standalone types.
Our lithium batteries have full communications available through CAN Bus for inverters and are Hubble-Riot Cloudlink ready.
Our lithium batteries have full communications available through CAN Bus for inverters and are Hubble-Riot Cloudlink ready.
AM SeriesThe AM Series stands for Any Mount. This gives installers more flexibility to either rack mount in a standard server cabinet or wallmount the batteries.
AM-2 WALL MOUNT
|
X SeriesThe X series is a rack mounted lithium battery. The X series units fit in a standard server rack cabinet to enable high density battery configurations.
X-101 RACK MOUNT
|
S SeriesThe S Series is a standalone form factor battery. These lithium batteries are cost effective and designed as a drop in lead acid battery replacement.
S-100 RANGE
|
AM SERIES
AM-2
51V 5.5KW
|
The AM-2 is our new 5.5KWh 51Volt Lithium pack designed to be easily wallmounted or shelf installed in a standard rack.
Specification: 51V 5.5KWh
Rating: 1C Parallel: up to 15 units per string Extras: Battery Link & DC cables included Internal Fire Suppression System: Yes CAN Bus: Yes Hubble Cloudlink Ready: Yes |
|
|
AM-3
51V 2.75KW
|
The AM-3 builds on the success of the AM-2, with a demand for a smaller KW pack, but still a high performance 1C battery to fit your budget.
Specification: 51V 2.75KWh
Rating: 1C Parallel: up to 15 units per string Extras: Battery Link & DC cables included Internal Fire Suppression System: Yes CAN Bus: Yes Hubble Cloudlink Ready: Yes |
|
|
AM-4
25.5V 2.6KW
|
The AM-4 is a 25.5V Lithium battery we are producing to cater for the 24V inverter market. The AM-4 is the perfect fit for 24V inverters where you still have the need to install lithium.
Specification: 25.5V 2.6KWh
Rating: 1C Parallel: up to 15 units per string Extras: Battery Link & DC cables included Internal Fire Suppression System: Yes CAN Bus: Yes Hubble Cloudlink Ready: Yes |
|
|
S SERIES
S-120
12.8V 1.5KWh
|
The S-120 is our high performance lead-acid drop-in replacement succeeding the popular S-100 Series
Specification: 12.8V 1.5KWh
Cell C Rating: 1C Maximum continuous discharge: 120Amp Cells: 2nd life prismatic LiFePO4 Series: 1, 2, 3 or 4 batteries Parallel: Up to 15 batteries only in 12V configuration Communication: None CAN Bus: No S-100 Compatible: Yes Hubble Cloudlink Ready: No |
|
|
The S-120 contains 1C rated cells that have a maximum continuous discharge of 120Amp. It is a lithium battery designed to be a drop in replacement for existing Lead Acid or Gel batteries.
The S-120 can be connected up to 4 times in series maximum. An external cell balancer is required when placing batteries in Series. You can configure the batteries in 12V, 24V, 36V or 48V in series.
The S-120 can be connected up to 4 times in series maximum. An external cell balancer is required when placing batteries in Series. You can configure the batteries in 12V, 24V, 36V or 48V in series.
S-100
12.8V 1.2KW
|
The S-100 range is slowly being phased out by the S-120 which boasts 120Amp. See the S-120 above.
Specification: 12.8V 1.2KWh
Rating: 1C Maximum continuous discharge: 100Amp Cells: 2nd life prismatic LiFePO4 Series: 1, 2, 3 or 4 batteries Parallel: Up to 15 batteries only in 12V configuration Communication: None CAN Bus: No Hubble Cloudlink Ready: No |
|
|
The S-100 is a 1C 100Ah lithium battery designed to be a drop in replacement for existing Lead Acid or Gel batteries.
The S-100 has a integrated BMS inside the battery container, which also contain the prismatic lithium cells.
The S-100 can be connected up to 4 times in series maximum. You can configure the batteries in 12V, 24V, 36V or 48V in series.
The new range, recognized by the prefix *HL on the serial number, is able to parallel and series simultaneously. However, it is not recommended with the old range, prefixed by *DS, as it can damage the BMS.
X SERIES
X-101
51V 5.5KW Rackmount
|
The X-101 is the next generation of the popular X-100 model. The X-101 now has CAN bus built in and is a higher density using the latest cell technology and is now a 5.5KW pack.
Specification: 51V 5.5KWh
Rating: 1C Parallel: up to 15 units per string Extras: Battery Link & DC cables included CAN Bus: Yes Hubble Cloudlink Ready: Yes |
|
|
DISCONTINUED MODELS
X-200
39V 4.1KW Rackmount
|
The X-200 is a 39V 4.1KWh and is a rack mount lithium battery pack designed for 36V Inverter and UPS systems.
Specification: 39V 4.1KWh
Rating: 1C Parallel: up to 15 units per string Extras: DC cables included CAN Bus: Yes Hubble Cloudlink Ready: Yes |
|
|
X-100 (48V 4.8KW)
Superseded with X-101 (5.5KW)
|
The X-100 is a rackmount 4.8KW battery that we introduced in 2019. It is under long term maintenance and has been replaced with the new X-101 model - the two are compatible.
Specification: 48V 4.8KWh
Rating: 1C Parallel: up to 15 units per string Extras: DC cables included CAN Bus: No Hubble Cloudlink Ready: Yes |
|
|
